GearboxSourcing.com — Find the right gearbox globally
0List your factory

PRODUCT & CONFIGURATION DIRECTORY

Find the right gearbox family.

Compare documented product families. Filter model configurations only where source data exists.

5 product families

Browse manufacturers →
K Series Helical-Bevel Geared Motor

Tunsing Transmission

K Series Helical-Bevel Geared Motor

The K series in Tunsing’s official catalog is a right-angle helical-bevel geared motor, mechanically distinct from its inline R range. The K-series diagrams show foot, flange, hollow-shaft, torque-arm and shrink-disc mounting arrangements. In the catalog selection table, the K37 column specifies 0.18 to 3 kW input power and 400 Nm permissible torque; the same column gives a ratio envelope of 5.36 to 131.87. Those three values describe the K37 frame’s catalog envelope, not a single duty point. The page also identifies motor terminal-box orientations and output-shaft rotation choices. Buyers should match the shaft interface, ratio, motor pole count and mounting position to a current drawing before comparing supplier quotes.

0 documented configurations · Manufacturer product imageView product family
K Series Helical-Bevel Geared Motor

Feluoka Heavy Industry Transmission

K Series Helical-Bevel Geared Motor

Feluoka’s K series is a modular helical-bevel geared motor for right-angle industrial transmission. Its official product page lists a series rated-output-torque span of 200 to 50,000 Nm, motor-power range of 0.12 to 200 kW at an input speed of 1,400 rpm, and ratio range of 5.36 to 179.86. These are independent series envelopes and should not be read as one simultaneously available configuration. The page lists foot-mounted shaft or hollow outputs, flanged forms, shrink-disc and splined hollow-shaft options. For a real duty cycle, identify frame, motor, ratio, mounting form and service factor before requesting a selection table.

0 documented configurations · Manufacturer product imageView product family
JHG Helical-Hypoid Gear Reducer

JIAOXING

JHG Helical-Hypoid Gear Reducer

JHG combines a hypoid first stage with additional gearing in a compact right-angle reducer. Jiaoxing lists sizes 50, 63 and 75. Two-stage units cover ratios 7.5–60, while three-stage units cover 80–300. The source identifies a hollow output and notes mounting compatibility with its JMRV range, which should be checked against the actual dimensional drawing before replacement. Ratio ranges describe available combinations, not a torque rating. Provide the motor speed, required output torque, duty cycle and mounting position so the supplier can confirm the correct stages, lubrication and thermal capacity.

0 documented configurations · Manufacturer product imageView product family
TK Spiral Bevel Gear Reducers

TONGLI

TK Spiral Bevel Gear Reducers

TK combines helical gearing with a spiral-bevel stage to turn power through a right angle. The manufacturer identifies Gleason spiral-bevel gearing and positions the family for installations where drive layout or height limits make an inline unit unsuitable. Published ratios extend from 5.36 to 197.37 across TK38–TK188. Its 50,000 Nm torque ceiling describes the series envelope. Check the shaft arrangement, output connection and mounting orientation as well as the selected ratio. A combined reduction arrangement needs its own manufacturer selection rather than a multiplication of unrelated catalog limits.

0 documented configurations · Manufacturer product imageView product family
T Spiral Bevel Gearbox

Boneng

T Spiral Bevel Gearbox

A right-angle transmission family with single, double and triple output arrangements. Shaft direction and which shaft receives the input are important when the ratio differs from 1:1.

0 documented configurations · Manufacturer product imageView product family